ldo06c series 30 watts total power: 30 watts input voltage: 3 - 13.8 vdc # of outputs: single special features ? 6 a output current rating ? input voltage range: 3 - 13.8 vdc ? adjustable output voltage: 0.59 - 5.1 v ? optional factory setting with power good ? excellent transient response ? power enable ? minimum airfow ? small package ? termination voltage capability ? rohs compliant safety ? ul, cul 60950-1 ? tv product service (en60950) ? ce electrical specifcations input input voltage ra nge 3 - 13.8 vdc input current minimum load remote off 50 ma 5 ma input current (max.) see note 3 6 a @ lo max. start-up time power up remote on/off 3 ms 2 ms output output voltage see note 5 0.59 - 5.1 v output setpoint accuracy 0.1% trim resistors 1.0% line regulation low line to high line 0.2% load regulation full load to min. load 0.5% min./max. load 0 a/6 a overshoot at turn-on 0.5% max. undershoot at turn-off 100 mv max. ripple and noise 5 hz to 20 mhz see note 1 20 mv vin = 5 v, vout = 2.5 v transient response see note 1, 2 130 mv max. deviation 15 s recovery to within regulation band general effciency (high input) vin = 5 v, vo = 2.5 v, lo = 6 a 92% switching frequency fixed 760 khz material fammability ul94v-0 weight 1.899 g (0.067 oz.) mtbf 12 v @ 40 c, 100% load bellcore 332 8,222,210 hours coplanarity surface mount models 150 m data sheet power
ldo 06 c 00 5w 05 v x j environmental specifcations thermal performance operating ambient temperature -40 c to +85 c see note 5 non-operating ambient temperature -40 c to +125 c protection short-circuit hiccup, non-latching overvoltage protection hiccup, non-latching recommended system capacitance input see note 6 0 f output see note 7 0 f output voltage adjustment of the ldo06c series the ultra-wide output voltage trim range offers major advantages to users who select the ldo06c series. it is no longer necessary to purchase a variety of modules in order to cover different output voltages. the output voltage can be trimmed in a range of 0.59 - 5.1 vdc. when the ldo06c converter leaves the factory, the output has been adjusted to the default voltage of 0.59 v. ordering information model number (3,5) output power (max.) input voltage output voltage output current (min.) output current (max.) efficiency (typical) regulation line load ldo06c-005w05-vj 30 w 3 - 13.8 vdc 0.59 - 5.1 v 0 a 6 a 92% 0.2% 0.5% ldo06c-005w05-hj 30 w 3 - 13.8 vdc 0.59 - 5.1 v 0 a 6 a 92% 0.2% 0.5% LDO06C-005W05-SJ 30 w 3 - 13.8 vdc 0.59 - 5.1 v 0 a 6 a 92% 0.2% 0.5% notes: easure as per reoene sste apatane ee tenal eferene note t s vn no t loa ange lo to full lo an full lo to ternal nput fusng s reoene tonal part nuers a e aalale wt fferent output oltages rflow epenent nu reure no apators neee for rpple urrent stalt no apators neee for stalt noti: oe oels o not support all optons please ontat our loal rtesn ee tenologes representate or use te onlne oel nuer sear tool at ttp:wwwrtesnopower to fn a sutale alternate product family product family ldo = ldo series output voltage output voltage 05 = 0.59 - 5.1 v performance performance c = cost optimized number of pins type of output type of output 5 w = 5 pins and wide output input voltage input voltage 00 = 3 - 13.8 v rohs compliance rohs compliance j = pb free (rohs 6/6 compliant) mounting option mounting option v = vertical h = horizontal s = horizontal smt vs = vertical smt custom option custom option part number system with options rated output current rated output current 06 = 6 amp ldo06c series data sheet
mechanical drawings 0.410 (10.41) 0.650 (16.51) 0.071 (1.80) 4x 0.067 (1.70) 0.16 0.010 (4 0.25) 0.050 (1.27) t yp 0.055 (1.40) 0.371 (9.42) 0.025 (0.64) .001 sq pin s t yp 0.062 (1.547) pin 1 pin 5 0.062 (1.57) ref 0.025 (0.64) .001 sq pin s t yp 0.120 (3.05) t yp 0.125 (3.18) t yp 0.443 (11.25) 0.055 (1.40) ref 0.000 (0) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.050 (1.27) 0.035 (0.89) 0.580 (14.73) 0.650 (16.51) 0.410 (10.41) pin 1 pin5 6 vertical mount dimensions in inches (mm). tolerances (unless otherwise specified) 2 places 0.030 (0.76) 3 places 0.010 (0.25) horizontal mount ldo06c series data sheet
ldo06c ds 27mar2015 mating connectors mechanical drawings pin assignments single output 1 enable 2 vin 3 common/rtn 4 vout 5 pg/trim 6 mech pin (horz/smt only) 7 mech pin (horz/smt only 0 (0.00) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.050 (1.27) 0.360 (9.14) 0.035 (0.89) ref 0.650 (16.51) 0.410 (10.41) 0.580 (14.73) 0.062 (1.57) ref 0.040 (1.02) ref 0.125 (3.18) t yp 0.441 (11.20) 0.055 (1.40) ref 0.025 (0.64) ref pin 1 pin 5 pin 6 pin 7 ldo06c - 005w05- surface mount ldo06c series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com www.artesyn.com while every precaution has been taken to ensure accuracy and completeness in this literature, artesyn embedded technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2015 artesyn embedded technologies, inc.
|
